Satin White Polyester Permanent Adhesive Labels
#102110 - Satin Polyester Permanent Labels
Our Satin White Polyester label makes colors appear extremely vibrant. This smooth 3M material is water solvent and scuff resistant for indoor and short-term outdoor applications. The general purpose clear acrylic adhesive adheres excellently to many surfaces. Resistance to water and abrasion is based on the technique used by the customer. We can cut to any size or shape.
Short Run
| Sheet Ct. | Price Per Sheet | ||
|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | |
| 10 | $9.12 | $11.37 | $13.22 |
| 25 | $5.75 | $6.77 | $7.06 |
| 50 | $4.18 | $4.89 | $5.07 |
| 100 | $3.56 | $4.12 | $4.62 |
| 250 | $2.67 | $3.38 | $4.10 |
| 500 | $2.57 | $3.05 | $3.74 |
Long Run
| Sheet Ct. | Price Per Sheet |
|---|---|
| 8.5″ × 11″ | |
| 500 | $1.36 |
| 1000 | $1.05 |
| 2000 | $0.95 |
| 5000 | $0.88 |
| 10000 | $0.83 |
Let us print for you! Full Color Printing available.
Specifications
Product Information
Description:
This White Polyester label features a shiny surface coating to provide superior toner anchorage in computer generated imaging systems. The medium-tack permanent acrylic emulsion offers short-term repositionability from many surfaces. The clay coated, stabilized white kraft liner has good lay-flat characteristics.
Facestock
- Polyester top-coated for excellent toner anchorage
- Caliper: 1.8 mils
- Good resistance to common cleaning solutions, alcohol, ammonia, water and humidity
Adhesive:
- White tri-bonded acrylic permanent
- Caliper: 0.7 mils
- Min. application temp:40°F
- Indirect Food: Yes
- Min. Service temp: -60°F
- Direct Food: No
- Max. service temp: 200°F
- Ul Approved: Yes
Note: For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 40°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.
Liner:
- Clay coated kraft (lay-flat) liner that has been silicone coated one side to give a controlled release.
- Caliper: 4.7 mils
- Weight: 78#
The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.
Availability
This product is stocked and can be shipped in as little as 24 hours. Please contact us for more information.