Rippedsheets.com 102300-6

PRODUCT DATA VALUE TEST METHOD

Physical Properties:

Thickness Laminate: 4.1 (104) +/- 15% ASTM D 3652

(Mils[microns]) Adhesive: 1.1-1.2 (28-30) +/- 0.1 (3)

Liner: 4.7 (119) +/- 10%

Dimensional Stability (%) MD: 0.50 Applied Shrinkage:

TD: 0.50 24 hour dwell time on

aluminum panel then

24 hours at 160ºF (71ºC)

Adhesion Properties:

Ultimate Peel from various

surfaces ASTM D 903

Average

Oz/in (N/m) (Modified for 72 hour

Stainless Steel 96 (1056) dwell time)

Acrylic 108 (1188)

Glass 102 (1122)

Expected Shear (hours) 20 ASTM D 3654 Method A

a. 1 hr. dwell

b. 1 sq. in. surface

c. 4 lb. load

Tack (gm) 630 ASTM D 2979

Expected Exterior Life: Indoor use only

Service Temperature Range: -40ºF to 176ºF (-40ºC to 80ºC)

Minimum Application

Temperature: 50ºF (10ºC)

Storage Stability: Two years when stored at 70ºF (21ºC) and

50% relative humidity

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Rippedsheets.com products shall be used only as a guide and do not

reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you

have indicated your contemplated use and shall in no event constitute a warranty of any kind by Rippedsheets.com. All purchasers of Rippedsheets.com products shall be

responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of

Rippedsheets.com is authorized to give any warranty, guaranty, or make any representation in addition or contrary to the above.