Enhancements
100300 Clear Domed Decals
Get that three-dimensional professional look with clear domed decals you make yourself. Rippedsheets.com provides you with a two-part crystal clear hardening system that you apply to your labels to create professional 3-D domed decals. Works ONLY on non-absorbent vinyl label materials for inkjet or laser printers (Doming material discolors paper labels and poly labels are not thick enough to have adequate surface tension to get a "dome").
100300 Clear Domed Decals Cost is $47.25 for two-part system (over one pound
mixed: enough to cover several hundred square inches) plus mixing cups and sticks.
100303 Extra Doming Supplies
Large jobs require two bags of extra cups, 3 syringes (good for about three applications each) and two extra bags of mixing sticks. Cost is $15.00.
100304 Plus Charge Diecutting for Dome
In order to assure that after printing, the matrix around the labels removes easily, there will be a 5% Plus Charge.
100420 Inkjet Polyurethane Doming Primer
This spray is applied over inkjet-printed Rippedsheets.com materials to help
prevent reactions between top coating and Polyurethane doming mixtures. Spray
on once and let dry for an hour, then spray on a second coat and let cure
for at least 24 hours before doming.
11 oz can: $10, good for about 10 to 15 sheets.
Q: How to make domes on your printed labels?
Click here on Warranty restrictions on use of Rippedsheets.com Doming Kits on Rippedsheets.com Materials, and use of Non-Rippedsheets.com materials or doming kits.
|
