Q: How to make domes on your printed labels?

A: Rippedsheets.com die cuts a label to the shape you want (inkjet or laser - please see our material choices). When you get it, you print your design on the labels in your printer. Then, you carefully remove the material around the label (stripping matrix), leaving the label on the backing all by itself (make sure the sheet is FLAT). You mix a two part clear plastic using a two cup technique (mix in one and pour into another). Making sure the label is flat (can't say this enough) you pour the mix onto the label and spread it out. Surface tension keeps the clear material from falling off the label. Keep pouring the mix until it domes up. Let it cure and as it cures, the bubbles rise and dissipate. The end result is a clear domed label.