|
Laser
Technical Specifications for Underwriters Laboratory Users
102250 Outdoor/Indoor White Polyester Perm
Rippedsheets.com has Underwriters Laboratory authority in UL file TEOU2.E243761 to apply the Repackaged Recognition Marking to repackaged label and tag products.
PN 102250 prints well in any color or B/W laser printer with a label
setting. Here are the specific printers approved for UL certification:
HP Laser Jet 4L/ML, 4P/M (Toner PN 92274A)
HP Laser Jet IIP/IIP Plus and IIIP (Toner PN 92275A)
HP LJ IIISI/IIISI MX and 4SI/4SI MX (Toner PN 92291A)
HP LJ 4/5 Series (Toner PN 92298A)
HP LJ 4V and 4MV (Toner PN C3900A)
HP LJ 5P/MP and 6P/MP (Toner PN C3903A)
HP Laser Jet 5SI and 8000 (Toner PN C3909A)
The black and white laser printer/laser toner combinations and pressure
sensitive label have been tested by UL and given the following UL
certifications:
Approved substrates: Affixed to stainless steel, galvanized steel, aluminum, alkyd paint, acrylic paint, polyester paint, epoxy paint, polyester (PET) plastic and porcelain, maximum temperature 150°C (302°F), minimum temperature -40°C (-40°F); phenolic and nylon, maximum temperature 100°C (212°F), minimum temperature -40°C (-40°F); polycarbonate, maximum temperature 100°C (212°F); polystyrene and polyphenylene oxide, maximum temperature 80°C (176°F), minimum temperature -40°C (-40°F); polypropylene, maximum temperature 80°C (176°F); acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 60°C (140°F), minimum temperature -40°C (-40°F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable where exposed outdoors to all surfaces except polycarbonate and polypropylene.
CSA approved under CSA Class Number 792201 - Adhesive Type Labels - Label
Stock. Approved for Indoor and Outdoor on metal (maximum temperature 150°C,
Plastics Group I (maximum temperature 100°C), and Plastics Groups II, III, IV,
V, VI, VII and VIIII (maximum temperature 80°C). CSA requires that CSA
customers must apply for component acceptance for their marking label printed
with their laser printer under Class 7921 - printed labels which takes as
little as two weeks according to CSA. CSA customers must contact the CSA
Component Acceptance Department after purchasing Rippedsheets.com materials
for CSA laser printer testing and acceptance. Rippedsheets.com PN 102280 is already CUL CSA approved for certain laser printers.
|
