CO2 Laser 102300-3 CO2 Laser 2D UID Matte Black Label Permanent (White Lettering/Barcode)- Meets Mil Std 130 - UL Approved

For laser printable polypropylene, Click here for laser printable 203032 Laser Printable Waterproof Polypropylene laser labels

Rippedsheets.com 102300-2 CO2 and Nd-Yag 2D UID laser marking material is designed to withstand vigorous post-mark processing as well as excellent dimensional stability, solvent, abrasion, and UV resistance. The 102300-3 provides excellent printability for barcode readability for 2D UID Mil Std 130, as well as US Coast guard and Navy application opportunities. This material is UL Listed for outdoor use. The 102300-3 is a 2.4 mil matte black acrylate Permanent Self Adhesive Label which ablates to a permanent white color with CO2 or and Nd-Yag 2D laser marking. The self adhesive is a 1.2 mil high temperature 3M 350 adhesive with a minimum application temperature of 39F. High temperature resistance long term of 392F (530 for 1 min., 482F for 5 min., 440F for 60 min.). Low temperature resistance is -76F without stress and -22F with stress.

102300-3 is excellent for applying to areas that may be subject to impact and does not crack.

102300-3 Matte Black Label requires relatively low focal power to mark and can be marked at up to 40" per second. The 102300-3 comes with a 1.5 mil clear PET liner than can be cut through, or ask about the kraft paper liner alternative for just kiss cutting.

102300-3 Matte Black Label will stick to a variety of surfaces but is UL approved for the following surfaces: stainless steel, galvanized steel, aluminum, acrylic paint, polyester paint, epoxy paint and porcelain, maximum temperature 175 C (347 F); phenolic, polycarbonate and nylon, maximum temperature 100 C (212 F); polystyrene, polyphenylene oxide, (ABS) plastic and polypropylene, maximum temperature 80 C (176 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable where exposed outdoors with a minimum temperature of -40 C (-40 F) for the above surfaces except nylon and polypropylene. The label stock is suitable for laser engraving to produce finished labels.

UL File TEOU2.E243761

A Note to Distributors: Rippedsheets.com 102300-3 prices out better than many other competitors. At retail pricing below, Rippedsheets.com 102300-3 with 50% more material on a roll, is priced lower than other laser marking materials.

Some laser marking tapes crumbles like license plate tags if you try to remove them. Rippedsheets.com 102300-3 does not crumble and is tear resistant. Rippedsheets.com sees many applications for this material where this feature is not necessary including DoD 2D UID because the labels are easier to handle before and during laser marking and application.

Product Information

102300-3 MSDS

102300-3 Technical Details

Long Run * 102300-3 Matte Black Label Permanent for CO2 laser marking. Pricing is for rolls only. Roll size is 4.75" X 984' (This is 50% more material than many other suppliers)

Long Run * 102300-3 Matte Black Label Permanent for CO2 laser marking. Pricing is for blank sheets only. Sheet size is 8" X 11". Sheets must be purchased with a minimum of 6000 sheets.

Rippedsheets.com has Underwriters Laboratory authority in UL file TEOU2.E243761 to apply the repackaged recognition marking to repackaged label and tag products.