|
Laser
102601 -40°F to 250°F White Teslin® Permanent
for Any Desktop Black and White Laser printer
Click here for pricing.
|
Description:
|
This label features standard pressure sensitive
construction, but with high-performance, water, alcohol, organic solvent
and acid resistant Teslin face stock and an aggressive permanent acrylic
adhesive with excellent clarity, high initial tack, high shear and
ultimate adhesion that make it suitable for application to a wide variety
of surfaces. The densified kraft liner has been coated one-side to give a
controlled release. This
material is UL recognized indoor and outdoor accepted indoor
for pre-approved components.
This material is a Xerox approved advanced specialty material for Xerox Docucolor Laser Printers. Teslin is approved for Nexpress, iGEN and Indigo Digital Presses.
|
|
Facestock
|
|
Durable, high performance Teslin
|
|
Adhesive
|
|
Clear acrylic permanent
|
|
Caliper
0.8 mils
|
|
Min. application temp:
|
+50 F
|
Indirect Food:
Yes
|
|
Min. service temp:
|
-40 F
|
Direct Food:
No
|
|
Max. service temp:
+250
F
UL Approved:
Yes
|
|
Note:
For best bonding conditions, application surface should be at room temper-ature
or higher. Low temperature surfaces, below +50F can cause the adhesive to
become so firm that it will not develop maximum contact with the
substrate. Higher initial
bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive’s
effectiveness, the label should be applied and allowed to bond a minimum
of 24 hours prior to evaluation.
|
|
Liner
|
|
Densified kraft paper
|
|
Caliper:
4.5 mils
|
Weight:
55#
|
|
The
above are typical technical values and are given in good faith based upon
our most up to date knowledge and experience.
As the products are used outside our control we cannot take
responsibility for any damage that may be caused using the product.
In every case, user shall determine before using any product in
full-scale production, or in any way, whether such product is suitable for
user’s intended use for their particular purpose under their own
operating conditions.
|
|
|
|
|
|
|
|
