Rippedsheets.com 100720 was submitted for testing against Table I
of Federal Specification DDD-L-20F, Amendment No. 1, dated March 30, 1990
and MIL-DTL-32075, dated October 17, 2000
TESTS
RESULTS
REQUIREMENTS-TABLE 1
Weight (OZ./SQ. YD.)
3.69
3.2 OZ./SQ. YD. MIN.
Bursting Strength (PSI)
67.5
50 PSI Minimum
Blocking
PASS #1
Scale Rating #2 Max
Color (PASS/FAIL)
PASS
PASS
BREAKING STRENGTH (LBS.)
Machine Direction
101.50
15 Lbs. Minimum
Transverse Direction
76.62
10 Lbs. Minimum
TEAR STRENGTH (GMS.)
Machine Direction
400
300 GMS. Minimum
Transverse Direction
512
250 GMS. Minimum
Note: To the best of our knowledge, no ozone depleting substances
have been used in the manufacturing or in the testing of this material.
TESTED IN GOVERNMENT LAB NO. 17415
The
above are typical technical values and are given in good faith based upon our
most up to date knowledge and experience. As
the products are used outside our control we cannot take responsibility for any
damage that may be caused using the product.In every case, user shall determine before using any product in full
scale production, or in any way, whether such product is suitable for user’s
intended use for their particular purpose under their own operating conditions.
