Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Outdoor Waterproof / Weatherproof White Vinyl Labels with Super Permanent Adhesive

PN# 102600 - Laser Printable

Good for Cryogenic - Nitrogen Liquid Phase Label Applications

Outdoor Waterproof / Weatherproof White Vinyl Labels with Super Permanent Adhesive102600 is a waterproof vinyl label that has special chemistry - when you print on the material, the label can be put under water and rubbed without smearing. It can be printed in desktop black and white or color laser printers. The clear acrylic adhesive is permanent on many surfaces. It has a minimum application temperature of 10°F and a service temperature range of -40°F or lower to over 300°F (limited to melt temperature of vinyl Facestock 302°F - 446°F). This material is RoHS compliant and there is no indication that the Facestock contains DEHP. The adhesive meets the requirements of FDA 21 CFR 175.105 for indirect food contact and is not made with Phthalate. Custom templates.

102600 was designed for chemical drum and other applications in harsh environments and can be applied to a wide variety of wet or dry surfaces.

This label material also has been used in special cryogenic label applications down to - 80°C to -196°C in nitrogen liquid phase applications by our customers. It has been tested down to nitrogen liquid phase to -196°C and been reported to work. Because this testing was not done within our control, we ask that you test this yourself to determine if it will work for your extreme low temperature applications. Free material samples are available on request. 102600 is the Facestock for


Please Contact Us for more information or to order these Waterproof Vinyl Labels with Super Permanent Adhesive.

Short Run Pricing

102600 Outdoor Waterproof Vinyl Label - Weatherproof White Super Permanent Self Adhesive Also Cryogenic. Pricing includes diecutting the sheets to any label size or shape you want.

Sheet Ct.Price Per Sheet
8.5" x 11"8.5" x 14"8.5" x 17"
Sheet Ct.Price Per Sheet
11" x 17"
13" x 19"

Long Run Pricing

102600 Outdoor Waterproof Vinyl Label - Weatherproof White Super Permanent Self Adhesive. Cutting die required (see die pricing for custom shapes). No die required for blanks.

Sheet Ct.Price Per Sheet
8.5" x 11"8.5" x 14"8.5" x 17"
10000$0.71/sh$0.86/sh$0.92 /sh
Sheet Ct.Price Per Sheet
11" x 17"
13" x 19"


Physical PropertiesValue
Thickness (without liner/adhesive):3.4 mil
Temperature Resistance: -40°F to 300 °F
Adhesive: Emulsion Acrylic
Adhesion Power: 3.4 lb/in
Tensile Strength MD: 3,000 PSI
Tensile Strength CD: 3,500 PSI
Minimum Application Temperature: 10°F

Product Information


This durable vinyl material features a special water-based matte topcoat that offers excellent toner anchorage and printability. An aggressive permanent acrylic adhesive with excellent clarity, high initial tack, high shear and ultimate adhesion make it suitable for application to a wide variety of surfaces. Applied labels will be resistant to water, mild acids, bases, salts, most petroleum based oils, greases and aliphatic solvents. The kraft liner gives a controlled release.


  • Flexible, top-coated white vinyl for excellent dry laser toner anchorage (Not Thermal Transfer Ribbon compatible).
  • Caliper: 3.4 mils
  • Opacity: N/A


  • Emulsion Acrylic
  • Caliper: .9 mils
  • Min. application temp: +10°F
  • Min. service temp: -40° F
  • Max. service temp: +300°F
  • Indirect Food Contact: Yes

Note: For best bonding conditions, application surface should be at or above minimum application temperature. Low temperature surfaces, below +10F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.

  • Loop Tack: 2.77 lbs
  • Peel Adhesion: 4.1 lbs


  • Loop Tack: N/A
  • Peel Adhesion: 4.4 lbs

Alkyd Enamel Paint

  • Loop Tack: N/A
  • Peel Adhesion: 3.9 lbs


  • Loop Tack: N/A
  • Peel Adhesion: 4.3 lbs


  • Loop Tack: N/A
  • Peel Adhesion: 4.6 lbs


  • Bleached kraft paper liner featuring good back printability
  • Caliper: 4.9 mils
  • Weight: 79#

The above specifications are up to date and are the typical and accurate values. We cannot take responsibility for damage to the product that is caused by use outside of our control.


Waste Electrical & Electronic Equipment (WEEE) Directive 2002/96/EC and Restriction of Hazardous Substances (RoHS) Directive 2002/95/EC Compliance

This material (104800), all sheet fed inks used by Rippedsheets.com, and all laminates used by Rippedsheets.com are WEEE Directive and ROHS Directive Compliant. There may be small trace amounts of the heavy metals (lead, cadmium, mercury, hexavalent chromium, and the flame retardants PBB (polybrominated biphenyls), PBDE (polybrominated diphenyl ethers), & decabromodiphenyl ether (DecaBDE)) present but an analysis of heavy metal content has already been carried out with regard to Packaging Directive 94/62/EC. The results obtained showed that typical values for these heavy metals are trace, if any. Click here for more information about WEEE and ROHS Compliance.

REACH Compliance

Reach is the Regulation for Registration, Evaluation, Authorization and Restriction of Chemicals. It entered into force on June 1, 2007 to streamline and improve the former legislative framework on chemicals of the European Union (EU). REACH places greater responsibility on industry to manage the risks that chemicals may pose to the health and the environment. In principal REACH applies to all chemicals: not only chemicals used in industrial processes but also in our day-to-day life, for example in cleaning products, paints as well as in articles such as clothes, furniture and electrical appliances.

Dangerous Goods Certification

102600 Facestock and adhesive has been tested and passed the British Standard 5609:1986 Section 2 required for the International Maritime Dangerous Goods (IMDG) Certification. No inks or ribbons were tested with this label.


Your labels can be shipped in as little as 24 hours. Please Contact Us for more information.

Split Shipments are FOB Rippedsheets.com

DupontTM and Tyvek® are trademarks or registered trademarks of E I du Pont de Nemours & Co or its affililiates. All rights reserved. Rippedsheets.com is not affiliated in any way with these companies.