Rippedsheets.com Custom

Product Information Sheet

Sales code: 102300-3

102300-3 CO2 Laser Black/White Polyester Label Perm

Last updated 03/11/05

Caliper:

10.3 mils including facestock, adhesive and liner

Description:

This material is UL Listed for outdoor use. This matte black UL-recognized material is designed for hand-applied and robotically applied high-end serialized, reverse bar coded and variable information labels for applications such as cellular phones, circuit breakers, beepers, power sources, automotive components, etc. Laser etching technology allows labels to be etched off-line, or pre-applied to be etched in-line in high-speed manufacturing processes. This durable material assures excellent dimensional stability and solvent, abrasion and UV resistance.  It provides excellent image quality at etching speeds up to 1000mm/second (40"/second.)  This product is recognized by UL Laboratories under 969 Standard for Marking and Labeling Systems.

Facestock

Durable white polyester film with an automotive-grade matte black laser etchable surface coating

Top Layer:

        0.4 mil (10 microns)

  Matte black acrylate

Base Layer:

        2.0 mil (50 microns)

  Matte white acrylate

Adhesive

Excellent high-temperature pressure-sensitive acrylic adhesive which prevents ooze that may result from heat generated by the laser

Caliper                                    1.2 mil (30 microns)

Min. application temp: 

   +39 F (4 C)

Min. service temp: 

   -40 F (-40C)

Max. service temp:                 +302F (+150C)

Note: For best bonding conditions, application surface should be at room temper-ature or higher. Low temperature surfaces, below +50F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate.  Higher initial bonds can be achieved through increased rubdown pressure.  In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.

Liner

78# Semi-bleached clay coated kraft paper

Caliper: 

3.2 mil (80 microns) - Densified kraft

The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience.  As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product.  In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.