Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Glossy Apply-Reapply Adhesive Label

#101800 - Glossy Ultra Removable Label

Economy Gloss Label
Waterbased Ultra Removable
Not Waterproof

Depending on your printer manufacturer, our print quality is either high gloss or satin four color process. Self adhesive is reposition-able and removable that can be applied to smooth surfaces and can be reapplied over and over again. Maximum adhesion is achieved in 24 hours. This material has excellent long term adhesion and long term resolvability and can be applied to a number of surfaces: glass, paper, metal, and hard plastics. What makes this label unique is that it can also adhere to more challenging surfaces like Teflon, textured PVC, and corrugated. This label material has excellent UV resistance and complies with FDA 21 CFR 175.105

Short Run

Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Sheet Ct.Price Per Sheet
8.5″ × 11″8.5″ × 14″8.5″ × 17″
10 $6.79 $8.72 $10.20
25 $4.28 $5.66 $6.22
50 $3.51 $4.63 $5.21
100 $3.13 $4.07 $4.67
250 $2.75 $3.59 $4.07
500 $2.36 $3.14 $3.46

Long Run

Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Sheet Ct.Price Per Sheet
8.5″ × 11″
500 $0.79
1000 $0.71
2000 $0.56
5000 $0.52
10000 $0.47

Let us print for you! Full Color Printing available.


Physical PropertiesValue
Thickness (without liner/adhesive):3.8 mils
Tear (grams): 65 CD
Tensile Strength: 37 MD
Adhesive:Water-based Removable
Minimum Application Temperature: 20°F
Service Range: -20°F to 250°F
FDA Approved - Indirect Food Contact: Yes


The print quality of this bright white gloss paper label material is excellent. The Ultra-Removable Self Adhesive is easily removed and leaves no residue, and can be applied, removed and applied again and again. This material can be used just like static cling but will adhere to more materials including plastics, paints, paper, cartons, etc.


  • Laser gloss 60# white high strength coated paper with excellent receptivity to toner imaging.
  • Caliper: 4.5 mil


Water based adhesive dispersion developed to provide good temporary adhesion to a variety of substrates. It exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, and paper. This adhesive is unique however, in that it also adheres to many challenging surfaces such as Teflon, Textured PVC, and corrugated. Excellent UV resistance. Complies with FDA 21CFR 175.105

  • Adhesive Thickness (mils): 0.5


  • Adhesion (oz/inch): 6 Modified PSTC-1
  • Service temperature range: -20°F 250°F
  • Min. application temp: 20°F

Note: For best bonding conditions, application surface should be at room temper-ature or higher. Low temperature surfaces, below 40°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.


Remoisturized calendered coated two sides bleached Kraft with high internal strength and excellent dimensional stability for roll to sheet lay flat.

  • Caliper: 3.5 mils
  • Weight: 50#

The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.


This product is stocked and can be shipped in as little as 24 hours. Please Contact Us for more information.