Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Glossy Optically Clear Polyester Permanent Adhesive Label

#102500 - Gloss Polyester Permanent Label

Clear Polyester Label
Printability
Laser
Finish
Gloss
Material
Polyester
Adhesive
Permanent Acrylic
Durability
Waterproof
Certification
CONEG, FDA, RoHS, WEEE

102500 has a glossy clear face stock, not matte. Excellent color laser printing results that are water, solvent, and scuff resistant for indoor and short term outdoor applications. The adhesive is a clear acrylic adaptable to many surfaces and complies with FDA 12 CFR 175.105 for indirect food contact. This label material is RoHS compliant and is compliant with the CONEG Model Toxics Packing Legislation. This material is not recommended for use in 12″ × 18″ printers.

Short Run

Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Sheet Ct.Price Per Sheet
8.5″ × 11″8.5″ × 14″8.5″ × 17″
10$7.66$8.88$10.26
25$4.49$5.81$6.69
50$3.45$4.77$5.51
100$2.89$3.84$4.92
250$2.52$3.06$4.60
500$2.36$2.86$4.29

Long Run

Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Sheet Ct.Price Per Sheet
8.5″ × 11″
500$1.03
1000$0.92
2000$0.76
5000$0.71
10000$0.66

Let us print for you! Full Color Printing available.

Specifications

Physical PropertiesValue
Thickness (without liner/adhesive:1.5 mils
Tensile Strength: 35 MD/48 CD
Adhesive:Permanent Acrylic
Minimum Application Temperature: 40F
Temperature Resistance: -60°F to 200°F
FDA Approved - Indirect food contact: Yes

Product Information

Description:

This Laser Gloss Clear Polyester label features a shiny surface coating to provide superior toner anchorage in computer generated imaging systems. The special gloss topcoat provides an acetate-like appearance and permits high-resolution laser printing. Its medium-tack permanent acrylic emulsion offers short-term repositionability from many surfaces. The clay coated, stabilized white kraft liner has good lay-flat characteristics.

Facestock:

  • Caliper: 1.8 mils

Adhesive:

  • Good resistance to common cleaning solutions, alcohol, ammonia, water and humidity
  • Caliper: 0.7 mils
  • Min. Application Temperature: 40°F
  • Indirect Food Contact: Yes
  • Temperature Resistance: -60°F to 200°F
  • Direct Food Contact: No

Note: For best bonding conditions, application surface should be at room temper-ature or higher. Low temperature surfaces, below 40°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.

Liner:

  • Clay coated Kraft (lay-flat) liner that has been silicone coated one side to give a controlled release.
  • Caliper:4.7 mils
  • Weight:78#

Availability

This product is stocked and can be shipped in as little as 24 hours. Please contact us for more information.