Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Outdoor Waterproof Vinyl Super-Permanent Adhesive Labels

#102600 - Matte Permanent Vinyl Labels

Outdoor Waterproof / Weatherproof White Vinyl Labels with Super Permanent Adhesive
Printability
Laser
Finish
Matte
Material
Vinyl
Adhesive
Super Permanent Acrylic
Features
Waterproof
Certification
WEEE, RoHS, REACH, FDA

Good for Cryogenic - Nitrogen Liquid Phase Label Applications, this waterproof phthalate-free vinyl label has a special chemistry. When you print on the material, the label can be put under water and rubbed without smearing. It can be printed in desktop black and white or color laser printers and The clear acrylic adhesive is permanent on many surfaces. It has a minimum application temperature of 10°F and a service temperature range of -40°F or lower to over 300°F (limited to melt temperature of vinyl Facestock 302°F - 446°F), making it very versatile for cold or hot environment usage, such as a heat room or refrigerated warehouse. This material is RoHS compliant and there is no indication that the Facestock contains DEHP. The adhesive meets the requirements of

102600 was designed for chemical drum and other applications in harsh environments and can be applied to a wide variety of wet or dry surfaces.

This label material also has been used in special cryogenic label applications down to - 80°C to -196°C in nitrogen liquid phase applications by our customers. It has been tested down to nitrogen liquid phase to -196°C and been reported to work. Because this testing was not done within our control, we ask that you test this yourself to determine if it will work for your extreme low temperature applications. Free material samples are available on request. 102600 is the Facestock for 104940 Cryogenic Piggyback Imageable Liner Permanent Label

Short Run

Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Sheet Ct.Price Per Sheet
8.5″ × 11″8.5″ × 14″8.5″ × 17″11″ × 17″13″ × 19″
10$7.04$8.82$10.87$15.47$15.52
25$4.73$5.91$7.30$10.37$10.43
50$3.96$4.94$6.10$8.67$8.72
100$2.80$3.47$4.31$6.15$6.21
250$2.13$2.66$3.30$4.63$4.69
500$2.02$2.26$2.67$4.35$4.38

Long Run

Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Sheet Ct.Price Per Sheet
8.5″ × 11″8.5″ × 14″8.5″ × 17″11″ × 17″13″ × 19″
500$1.11$1.38$1.48$1.62$1.69
1000$0.99$1.21$1.32$1.44$1.52
2000$0.87$1.08$1.16$1.38$1.40
5000$0.75$0.92$1.00$1.25$1.28
10000$0.71$0.86$0.92$1.16$1.19

Let us print for you! Full Color Printing available.

Specifications

Physical PropertiesValue
Thickness (without liner/adhesive):3.4 mil
Temperature Resistance: -40°F to 300 °F
Adhesive: Emulsion Acrylic
Adhesion Power: 3.4 lb/in
Tensile Strength MD: 3,000 PSI
Tensile Strength CD: 3,500 PSI
Minimum Application Temperature: 10°F

Product Information

Description:

This durable vinyl material features a special water-based matte topcoat that offers excellent toner anchorage and printability. An aggressive permanent acrylic adhesive with excellent clarity, high initial tack, high shear and ultimate adhesion make it suitable for application to a wide variety of surfaces. Applied labels will be resistant to water, mild acids, bases, salts, most petroleum based oils, greases and aliphatic solvents. The kraft liner gives a controlled release.

Facestock:

  • Flexible, top-coated white vinyl for excellent dry laser toner anchorage (Not Thermal Transfer Ribbon compatible).
  • Caliper: 3.4 mils
  • Opacity: N/A

Adhesive:

  • Emulsion Acrylic
  • Caliper: .9 mils
  • Min. application temp: +10°F
  • Min. service temp: -40° F
  • Max. service temp: +300°F
  • Indirect Food Contact: Yes

Note: For best bonding conditions, application surface should be at or above minimum application temperature. Low temperature surfaces, below +10F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.

  • Loop Tack: 2.77 lbs
  • Peel Adhesion: 4.1 lbs

Aluminum

  • Loop Tack: N/A
  • Peel Adhesion: 4.4 lbs

Alkyd Enamel Paint

  • Loop Tack: N/A
  • Peel Adhesion: 3.9 lbs

Polypropylene

  • Loop Tack: N/A
  • Peel Adhesion: 4.3 lbs

HDPE

  • Loop Tack: N/A
  • Peel Adhesion: 4.6 lbs

Liner:

  • Bleached kraft paper liner featuring good back printability
  • Caliper: 4.9 mils
  • Weight: 79#

The above specifications are up to date and are the typical and accurate values. We cannot take responsibility for damage to the product that is caused by use outside of our control.

100703
3 year outdoor test results

Availability

This product is stocked and can be shipped in as little as 24 hours. Please contact us for more information.