Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Silver Tamper-Void Polyester Permanent Adhesive Labels

#102353 - Silver Polyester Label

Void labels
Printability
Laser
Finish
Metallic Silver
Material
Polyester
Adhesive
Permanent Acrylic
Features
Security
Certification
RoHS, WEEE

These tamperproof labels have a dull silver look to it and a VOID self adhesive that if removed after application leaves a VOID pattern indicating tampering. 102353 Reverse Tamper-Void Gray Labels may be applied to metal, glass, or polycarbonate plastics and left to dwell for the VOID to show when the label is partially or fully removed.

The adhesive is a clear acrylic adaptable to many surfaces with a minimum application temperature of 50°F and a service range of -40°F to 176°F. On rough surfaces or low energy surfaces, 102353 shows an excellent void- tamper proof pattern.

Short Run

Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Sheet Ct.Price Per Sheet
8.5″ × 11″8.5″ × 14″8.5″ × 17″
10$7.22$9.22$11.34
25$5.07$6.34$7.84
50$4.30$5.39$6.64
100$3.10$3.91$4.83
250$2.46$3.06$3.79
500$2.36$2.93$3.65

Long Run

Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Sheet Ct.Price Per Sheet
8.5″ × 11″
500$2.02
1000$1.70
2000$1.59
5000$1.46
10000$1.40

Let us print for you! Full Color Printing available.

Specifications

Description:

This is a matte top-coated laser printable tamper evident metalized silver void polyester film. It is coated with a permanent, pressure sensitive acrylic adhesive and backed with a backside-printable, two sided, poly coated, tissue backed release liner. The tamper evident feature of this product becomes permanently nonfunctional after exposure to 212°F temperature. This product is UL recognized for indoor/outdoor use with occasional exposure to lubricating oil and water.

Facestock

  • Metalized silver polyester film
  • Caliper: 2.4 mils

Adhesive:

  • Emulsion acrylic permanent
  • Caliper: 1.0 to 1.1 mils
  • Min. application temp: 50°F
  • Indirect Food: No
  • Min. Service Temp: -40°F
  • Direct Food: No
  • Max. service temp: 302°F

Note: For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 50°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.

Liner:

  • Bleached 5.7 mil kraft paper liner that has been poly coated two sides to give a controlled release.
  • Caliper: 5.7 mils
  • Weight: NA

Basis weight: NA The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.

Availability

This product is stocked and can be shipped in as little as 24 hours. Please Contact Us for more information.