Label Plus Charges, Standard Perforations, Professional Scores, Custom Cutting & Slitting, Standard Folding

You can avoid the following charges for more than 30 labels per sheet by specifying a maximum of 30 labels per sheet on your order, if necessary.

All Short Run per-sheet label prices on Rippedsheets.com website is based on 30 labels per sheet or less. The following applies if label size is less than 2.625″ × 1″ in most cases:

The smaller the labels, the more labels per sheet, and the longer it takes our Short Run equipment to produce each sheet. For example, if 30 labels per sheet are ordered on 100 sheets, then that is 3,000 labels. If 500 labels per sheet are ordered on 100 sheets, then that is 50,000 labels. Thus we charge more for more than 30 labels per sheet.

Short Run per-sheet prices rise as the labels get smaller and the number of labels per sheet increases:

There is no 31 - 800+ label per sheet costs for Long Run pricing which is priced per sheet only because Long Runs are produced on different presses.

Standard Perforations

Rippedsheets.com Standard Perforation is a 0.30″ butt and a 0.02″ tie (3 TPI). The tie is always at the edges. In some special shapes, Rippedsheets.com uses custom designed 0.01″ niks to keep the die-cut shape locked in the sheet.

If you want a higher count perforation such as 30 perforations per inch, the short run plus charge increases as the time to process increases. The following charges are IN ADDITION to Label Plus Charges (if applicable):

Professional Folding Scores and Custom Slitting & Cutting

Rippedsheets.com is able to create a Professional Folding score that has the proper crease depth for tag materials. Rippedsheets.com can create up to ten (10) creases per document with a plus or minus 0.01181″ accuracy. Creases can be made in either vertical or horizontal directions on an 8.5″ × 11″ sheet. For 8.5″ × 14″, 11″ × 17″ and 12″ × 18″ sheet sizes, creases can only be made in the short direction. For Rippedsheets.com Presentation Folder Mailers and Photo Folders, the standard folder size is 11″ × 17.5″ flat (11″ × 8.75″ folded) and the maximum size is 12″ × 18″ flat (12″ × 9″ folded). Contact us for other customization options.

Rippedsheets.com is able to do custom slitting and cutting. Slitting is usually in the long direction of the sheet, whereas cutting is usually in the short direction. However, for an 8.5″ × 11″ sheet, Rippedsheets.com can treat the long direction as the short direction and vice versa.

Rippedsheets.com can do up to six (6) slits in either vertical or horizontal direction on an 8.5″ × 11″ sheet. For 8.5″ × 14″, 11″ × 17″ and 12″ × 18″, six (6) slits can only be made in the long direction.

For 8.5″ × 14″, 11″ × 17″ and 12″ × 18″, there can be up to fifteen (15) cuts per sheet in the short direction only.

Materials that can be processed are all paper tag, paper clean-cut materials and 100703, and the following label materials: 101700, 01200, 104200, 101200

The following charges are IN ADDITION to Label Plus Charges (if applicable):

Standard Folding Perforation

Rippedsheets.com Standard Folding Perforation is a 0.25″ butt and a 0.25″ tie (2 TPI). The tie is always at the edges. In some special shapes, Rippedsheets.com uses custom designed 0.01″ niks to keep the die-cut shape locked in the sheet.

Materials that can be processed are all paper tag, paper clean-cut materials and 100703, and the following label materials: 101700, 101200, 104200, 101200

If you want a higher count folding perforation such as 10 perforations per inch, the short run plus charge increases as the time to process increases. The following charges are IN ADDITION to Label Plus Charges (if applicable):