Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Engineering Grade Retroreflective Permanent Destructible Label

#105677 - 105688 - Finish Type, Adhesive Type Product Type

Printability
Laser
Finish
Retroreflective
Material
Urethane with Glass Microspheres
Adhesive
Solvent-based Permanent
Features
Waterproof

This is a 6 mil engineering grade Retro-Reflective label. It provides good reflection even in poor visibility and bad weather conditions and complies with international standards for retroreflectivity ASTM D 4956 for Type I, Class 1. As part of our new Digital line this product has been primed for printing with Rippedsheets.com proprietary top coats. These retroreflective labels are also tamperproof and will break into pieces if removal is attempted. It is a flexible, weather resistant material that has an excellent impact and scratch-resistant surface. This material has excellent resistance to most oils, greases, fuels, weak acids, salts, and alkali. It can be used for traffic control (e.g. stop signs), black and white regulatory signs, reflective letterings and numbers, and other outdoor signage.

Short Run

Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Sheet Ct.Price Per Sheet
8.5″ × 11″
10$11.68
25$9.60
50$7.98
100$7.18
250$6.38
500$5.59

Let us print for you! Full Color Printing available.

Specifications

Physical PropertiesValue
Thickness (without liner/adhesive):6 mil
Temperature Resistance: -69°F to 180°F
Adhesive: Solvent-based Permanent
Adhesion Power: 3.4 lb/in
Tensile Strength: 10 MPa
Minimum Application Temperature:50°F
Meets ASTM D 4956 specifications for retroreflective sheeting. Type I, Class 1.
 Min. coefficient of retroreflection (foot candle/ft²)Daytime Luminance Factor (Y%)
OBSERVATION ANGLE 0.2°0.5°
ENTRANCE ANGLE -4°30°-4°30°MinimumMaximum
White7030301527-
Yellow502225131545
Orange2571341030
Red1467.532.515
Green93.54.52.2312
Blue41.720.8110
Brown10.30.30.219

Retroreflectivity describes how light is reflected off a surface and returned towards the original source. The entrance angle is theangle in which the light source enters the reflective sheeting. The observation angle is the angle between the path of the light source and the observer's sight path. The coefficient of retroreflection measures the efficiency of a retroreflective material. The retroreflective efficiency is the percent of light returned back to the source. Typical retroreflective beaded sheetings have a 7% to 14% retroreflective efficiency.

Complies with international standards for retroreflectivity ASTM D 4956 for Type I, Class 1

The states in blue have approved the use of this reflective material for traffic control.

Retroreflective State Approval Map

Colors Available

This material comes in these 12 colors.

Color NamePart Number
White105677
Lemon Yellow105678
Yellow105679
Orange105680
Red105681
Ruby Red105682
Sky Blue105683
Blue105684
Black105685
Brown105686
Gold105687
Green105688

For other colors please call for availability and minimums

Availability

This product is stocked and can be shipped in as little as 24 hours. Please Contact Us for more information.