Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Matte Ultra Removable Adhesive Paper Labels

#101850 - Matte Apply-Reapply Paper Label

Removable label
Laser & Inkjet
Waterbase Ultra Removable
Not Waterproof

The print quality of this bright white matte paper label material is excellent. The Ultra-Removable Self Adhesive is easily removed and leaves no residue, and can be applied, removed and applied again and again. This material can be used just like static cling but will adhere to more materials including plastics, paints, paper, cartons, etc. Its "removable" and "repositionable" adhesive can be applied to smooth surfaces, removed and reapplied over and over again. Maximum adhesion is achieved in 24 hours. These Apply - Reapply labels have excellent long term adhesion and long term removability on compatible hard surfaces including hard plastics, Teflon, metal, glass, and paper including corrugated cardboard. It offers excellent UV resistance and complies with FDA 21 CFR 175.105 (Components of adhesives intended for use in packaging, transporting or holding food). This material is RoHS compliant and is compliant with the CONEG Model Toxics Packing Legislation. Archival safe and acid free.

Short Run

Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Sheet Ct.Price Per Sheet
8.5″ × 11″8.5″ × 14″8.5″ × 17″

Long Run

Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Sheet Ct.Price Per Sheet
8.5″ × 11″

Let us print for you! Full Color Printing available.


Physical PropertiesValue
Thickness (without liner/adhesive):4.7 mil
Tear (grams): 81 CD
Tensile Strength: 37 MD
Adhesive:Water-based Removable
Service Range: -20°F to 250°F
Minimum Application Temperature: 20°F
FDA Approved - Indirect Food Contact: Yes


Laser EDP is 60# white high strength uncoated ground wood-free paper with good receptivity to toner and inkjet imaging.


Water based adhesive dispersion developed to provide good temporary adhesion to a variety of substrates. It exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, and paper. This adhesive is unique however, in that it also adheres to many challenging surfaces such as Teflon, Textured PVC, and corrugated. Excellent UV resistance. Complies with FDA 21CFR 175.105

  • Adhesive Thickness (mils): 0.5
  • Adhesion (oz/inch): 6
  • Service Temperature Range: -20°F to 250°F
  • Min. Application Temperature: 20°F

Note: For best bonding conditions, application surface should be at room temper-ature or higher. Low temperature surfaces, below 40°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.


  • Remoisturized calendered coated two sides bleached Kraft with high internal strength and excellent dimensional stability for roll to sheet lay flat.
  • Caliper: 3.5 mils
  • Weight: 50#

The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.


This product is stocked and can be shipped in as little as 24 hours. Please contact us for more information.

Questions? We can help! 888-791-9590