The print quality of 101700 is excellent. The adhesive is a clear acrylic adaptable to many surfaces with an application temperature of 32°F and a service range of -4°F to 248°F. Material prints well in your color laser printer. This material is RoHS compliant, does not contain DEHP, and the adhesive is FDA approved for indirect food contact.
Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Price Per Sheet
Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
50# Paper,lignin free, machine finished paper, especially designed for inkjet (single and multi-color), laser and photocopiers
Substance weight: 47 lbs./ream (25″ × 38″) ISO536
Caliper: 3.5 mil ISO534
Tensile strength: 31 lbf/in (MD) ISO1924
Roughness: 5.0 microns PPS10 ISO8791
Opacity: 92% ISO2471
Brightness: 108% ISO2470
RP54,Universal permanent modified acrylic for roll to sheet applications
Min. labeling temp: 32°F Min. Service temp: -4°F to 248°F
Designed for roll to sheet laminates in a wide range of applications, very good heat resistance, good adhesion to corrugated board and non polar substrates.
50# White Kraft (2.8 mil )
Substance weight: 47 lbs./ream (24″ × 36″)
Caliper: 2.7+/- 0.2 mil
The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.