Order: 1-888-791-9590

International Shipping Available
Se Habla Español

Glossy Clear on Clear No Label Look Polyester Removable Adhesive Labels

#102570 - Gloss Polyester Removable Labels

Clear Labels
Removable Acrylic

Label material and self adhesive are clear. If you hold a label up to the light, the edges are very hard to discern from the background because of the labels ultra clarity. This clear poly material was developed for graphics applications where the label needs to disappear to emphasize the graphics. Self Adhesive is aggressive yet removable in one piece with no adhesive residue. The removable adhesive is a clear acrylic adaptable to many surfaces with a minimum application temperature of 50°F and a service range -20°F to 302°F. Applying a clear label to a dark surface?

Printing on 102570 requires graphics that are compatible with super translucent materials. Printer settings must be adjusted to 300x300 dpi or 600x600 dpi to assurebest toner anchoring and no or minimum toner spatter. Resistance to waterand abrasion is technique based, determined by the customer. 102570 is excellent for short term indoor applications.

Short Run

Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Sheet Ct.Price Per Sheet
8.5″ × 11″8.5″ × 14″8.5″ × 17″

Long Run

Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Sheet Ct.Price Per Sheet
8.5″ × 11″

Let us print for you! Full Color Printing available.


HP 4600/4650 Postscript Driver


This Laser Gloss Ultra-Clear Polyester label is nearly invisible in most substrates. The special gloss topcoat provides an acetate-like appearance and permits high-resolution laser printing. Its low-tack removable acrylic emulsion offers extended repositionability from many surfaces. It is dimensionally stable and has a two-year expected outdoor life.


  • Clear polyester film top-coated to accept laser toner
  • Caliper: 2.0 mils


Removable pressure sensitive acrylic. Application environments and certain surfaces such as vinyl, glass, acrylic, styrene and polycarbonate can cause increased adhesion and adhesive transfer. We recommend that all surfaces be tested for compatibility.

  • Caliper 0.8 mils
  • Min. Application Temp: 50°F
  • Min. Service Temp: -20°F
  • Max. service temp: 302°F

Note: For best bonding conditions, application surface should be at room temper-ature or higher. Low temperature surfaces, below 50°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. Maximum bonding occurs in 24 hours.


  • Ultra-clear polyester quick-release liner
  • Caliper: 4.0 mils

The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.


This product is stocked and can be shipped in as little as 24 hours. Please Contact Us for more information.

Questions? We can help! 888-791-9590